/
Mobile Pumping Truck of Land
- USD 75000.00 /Unit
- 1 Unit
- 18 Unit
- 20 days
Product Description
Brief introductionto oil production truck
The car is mainly used for oil production, forced drainage, test oil and other operations of the oil well.
The car adopts the pumping principle, and conducts the oil production, forced drainage and test oil operations through oil well casing or oil well tubing. During operation, the wire cable is aligned with the wellhead. Put the pipe under the liquid level to a certain depth and then raise it, and the oil in the well can be pumped and automatically pressed in the oil tank car or oil storage tank.
I. Main application:
1. Oil production: 3,000Kg oil fluid can be lifted each time, and 10 to 40 tons per day. It adopts to both the new wells and the old wells, especially suitable for low-yield wells, open wells, no power supply wells and edge wells.
2. Forced drainage and test oil: the speed is 10 times faster than that of the average oil sucking machine, has a certain deplugging function to the discharge orifice, and can accurately find out the feed liquid amount or oil production of the well.
3. It can also be used for drifting, paraffin removal, refloatation and other operations.
II. Characteristics of the whole vehicle:
1. The automobile power is used for operation, and it has strong maneuverability, and can work during the day and at night.
2. The production cost is low.
3. The structure is compact and reasonable, with practical and reliable operations.
4. The truckhas a larger horsepower and better performance, and can adapt to a variety of well-site operations.
III. Structural characteristics:
1. Launch, gear, clutch, throttle and other operations can be conducted in the operating room.
2. The cantilever shall adopt the hydraulic device, which can stretch, rise and fall and swing, to ensure rapid, smooth, safe and accurate positioning.
3. The measurement device is accurate and reliable, and has a waterproof, oil proof, shock-proof, and other characteristics.
4. The structure of the winch barrel is unique, with high strength, and the brake device adopts the double brake type, and is arranged with the air-cut brake function, safe and reliable.
5. The rope-aligning device adopts the dual system of manual control and automatic control, which can be automatically converted to each other. The rope-aligning is of high precision.
6. The traveling crane and winch power adopt the air control switching device.
7. The bailing amount of the defueling pump is large, and the leakage loss is less, which can be quantitative, and has a certain anti-sticking performance.
8. The operating room is spacious, bright and comfortable, with good vision, which can be used for both work and rest.
The car is mainly used for oil production, forced drainage, test oil and other operations of the oil well.
The car adopts the pumping principle, and conducts the oil production, forced drainage and test oil operations through oil well casing or oil well tubing. During operation, the wire cable is aligned with the wellhead. Put the pipe under the liquid level to a certain depth and then raise it, and the oil in the well can be pumped and automatically pressed in the oil tank car or oil storage tank.
| Project | Parameters |
Dimensions(mm) | 12550×2500×3960 |
Total Mass(Kg) | 21300 |
Approach Angle/ Departure Angle(°) | 18/14 |
Turn radius(M) | 10.6 |
Derrick height(M) | 12 |
Steel Wire Rope | Φ16mm |
Maximum Work Depth(M) | 2500/3000 |
Rated hoist load(KN) | 80 |
Operating distance between chassis and wellhead(M) | 25 |
Work-line speed(m/s) | 0.5-5 |
Maximum Bailing Amount(tons/each time) | 3 |
ChassisType | SX1250MB4 (6×4China V) |
Engine Model | WP10.310E53 |
Rated Power(Kw) | 228 |
I. Main application:
1. Oil production: 3,000Kg oil fluid can be lifted each time, and 10 to 40 tons per day. It adopts to both the new wells and the old wells, especially suitable for low-yield wells, open wells, no power supply wells and edge wells.
2. Forced drainage and test oil: the speed is 10 times faster than that of the average oil sucking machine, has a certain deplugging function to the discharge orifice, and can accurately find out the feed liquid amount or oil production of the well.
3. It can also be used for drifting, paraffin removal, refloatation and other operations.
II. Characteristics of the whole vehicle:
1. The automobile power is used for operation, and it has strong maneuverability, and can work during the day and at night.
2. The production cost is low.
3. The structure is compact and reasonable, with practical and reliable operations.
4. The truckhas a larger horsepower and better performance, and can adapt to a variety of well-site operations.
III. Structural characteristics:
1. Launch, gear, clutch, throttle and other operations can be conducted in the operating room.
2. The cantilever shall adopt the hydraulic device, which can stretch, rise and fall and swing, to ensure rapid, smooth, safe and accurate positioning.
3. The measurement device is accurate and reliable, and has a waterproof, oil proof, shock-proof, and other characteristics.
4. The structure of the winch barrel is unique, with high strength, and the brake device adopts the double brake type, and is arranged with the air-cut brake function, safe and reliable.
5. The rope-aligning device adopts the dual system of manual control and automatic control, which can be automatically converted to each other. The rope-aligning is of high precision.
6. The traveling crane and winch power adopt the air control switching device.
7. The bailing amount of the defueling pump is large, and the leakage loss is less, which can be quantitative, and has a certain anti-sticking performance.
8. The operating room is spacious, bright and comfortable, with good vision, which can be used for both work and rest.
Product Images
-
4X2 Type 5m3 6m3 FotUS $20900.00 /Unit -
Shacman F3000 8X4 TyUS $51000.00 /Unit -
SHACMAN F3000 6x4 coUS $44900.00 /Unit -
Foton 4x2 2 3 cubicUS $9000.00 /Unit
