Auman 8X4 12ton Telescopic Crane Monted on Truck

A crane mounted on atruckcarrier provides the mobility for this type of crane. This crane has two parts: the carrier, often referred to as the Lower, and the lifting component which includes the boom, referred to as the Upper. These are mated together through a turntable, allowing the upper to swing from side to side. These modern hydraulic truck cranes are usually single-engine machines, with the same engine powering the undercarriage and the crane. The upper is usually powered via hydraulics run through the turntable from the pump mounted on the lower. In older model designs of hydraulic truck cranes, there were two engines. One in the lower pulled the crane down the road and ran a hydraulic pump for the outriggers and jacks. The one in the upper ran the upper through a hydraulic pump of its own. Many older operators favor the two-engine system due to leaking seals in the turntable of aging newer design cranes.

1,Crane capacity from 2Ton to 25Ton , include boom crane and Jib crane ,crane can be located at rear of cabin or rear of cargo according to customer requiremetns.
We also can sell crane only to install it on customer's chassis ,we can provide you drawing and other necessary information for installation .
crane brand like CLW , SANY-PALFINGER, SHIMEI, UNIC,etc .

2,Chassis can be choose others like FAW , ISUZU , SINOTRUCK, FOTON , JAC , JMC ,SHACMEN ,NORTH BENZ , ETC ,

3, cargo dimension is according to customer requirements and chassis .

3, Warranty period is 8000KM or 12 month which comes first .

4,so if you have such requirements ,please contact me with cell phone 86-13872885121.

specification ofAuman 8x4 12Ton telescopic crane monted on truck

Truck Parameter
Vehicle model	CLW5311JSQB3
Overall dimension(mm)	12000×2500×3800	GVW(Kg)	31000
Cargo dimension(mm)	8500,8300×2315×550,800	Loading weight(Kg)	16000
Approach/departure angle	15/10	Curb weight(Kg)	14805
Front/rear overhang(mm)	1555/2395	Max speed(km/h)	85
Chassis model	BJ5317ZNPJJ-S
Engine model	Engine Manufacture	exhaust	Power
SC8DK260Q3 SC8DK280Q3	Shanghai Diesel Engine	8270 8270	192 206
Fuel	Diesel	Emission standard	Europe III
Wheel no	4	Tyre No	12
Wheel base	2000+4700+1350	Tyre model	11.00-20,11.00R20,12.00-20,12.00R20
Wheel loading	6500/6500/18000	Front track	1930/1930
suspension	13/14/12	Rear track	1847/1847
Crane
Crane model		SQ12SK3Q
Max lifting weight		12000KG
Max lifting moment		30T.M
Rotation angle		360 degree rotation
Lifting capacity(kg/m)		12000/2.5, 6000/4.5, 3500/7, 2700/9, 1800/12.5

Photo of Auman 8x4 12Ton telescopic crane monted on truck






certificate of factory :



FAQ:

Q1. Quality control
A:We make quality control for each step while producing and before shipping.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packagesbefore you pay the balance.LC terms is also can be accepted .

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.DAP etc .

Q4. How about your delivery time?
A: Generally, it will take 10 to 20 days after receiving your advance payment. The specific delivery time dependson the items and the quantity of your order.For standard products, delivery time is as below:Water tanker truck:7 days
Fuel tanker trailer:15-20days
Garbage truck:15 days
Sweeper road truck:25 days
Wecker truck:7-10 days
Suction sewage/Fecal truck:7-15 days
Crane truck:15 days
Refrigerator/Van truck:7-15 days
Dump truck:20 days
Concrete mixer truck:7-25 days
LPG :20-30 days
LED truck:7-15 days
(the above is left hand drive chassis ,if you need the right hand drive chassis ,delivery time is longer than Left hand drive truck,Detailed clauses are subject to contract .)

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. How to control truck quality?
A: we have Rich experienceworkers and engineer to control quality before and on production , we strictly followed STATE special truck technical specificationandsafety production specification .We have been in this line for over 15 years, dealing with all kinds of special trucks and trailers.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,no matter where they come from.Q9. Did you sell truck to our country before?A:Our main market is Africa, Asia, South America , Oceania,middle east , annual sales is around 5000units and keeping growing every year .