42000L Aluminium Liquid Petrol Gasoline Tanker

42000L Aluminium Liquid Petrol Gasoline Fuel Tanker
Competitives,
1. Axles:TheaxlecanbeselectedinBPWandFUWAdomesticandinternationalbrand
2. Suspensionsystem:Mechanicalsuspensionandairsuspensionseriesoptional
3. Brakesystem:Muchmoresafetyandreliabilityondual-loopairbrakesystem

The advantages of producing tanks from aluminum alloys,
1. Maximum solidity and lightness of the construction;
2. Reducing transport costs by 1 ton of the transported goods;
3. Improving safety of transporting hazardous goods (not subject to corrosion, wearproof, spark-proof)
4. The lightest vehicles, with maximum volume and a long service life for all types of cargo

The Aluminium Alloy semi trailers is applied to transport OIL, FUEL, DIESEL, WATER AND ALL KINDS OF LIQUEFIED CHEMICALS in a short or long distance. It's an ideal equipment to transport oil from oil storage field to oil plant, and transfer oil from refinery and wharf to oil storage field. It is also been used in refueling service station.

42000L Aluminium Liquid Petrol Gasoline Fuel Tanker
TANK BARREL Aluminium alloy 5083		Main beams high tensile steel Q345B
Curb Weight	6500kgs	Payload	31000kgs
Total Weight	37200kgs	Volume	42000 LITRES plus max 5% ullage.
Dimension	OverallLength	12000 mm
	Overall Width	2500mm
	Overall Height	3800mm

A,TANK BARREL
1.Tank Material	Aluminium alloy 5083
2.Main beams	high tensile steel Q345B
a) Dish end	7.00mm conforming to ADR
b) Tand body	6.00mm conforming to ADR
c) Baffle	6.00mm conforming to ADR
2.Shell Finish	Tank barrel outer surface cleaned out, paint. according to customer's requirement.
3. Tank Profile	Maximum profile design that maximizes volumetric capacity whilst achieving a low centre of gravity.
4.Design Code/ Vapor Testing	Hydrostatic test on each compartment.
5. Compartments	1 compartment
6.Bulkhead End Plate / dish end	7mm Aluminium alloy 5083 O dished bulkhead. Dish end plate to be made by intact-plate without joint/connection.
7. Main Beam	Standard features of a full-length aluminum alloy main frame
8..Roll Over Coaming / spill box	Extrusion aluminium alloy in inverted 'U' section with full length sliding rail for anti-fall protection system.

B. TANK FITTINGS AND PIPING
1.Manholes API standard	2nos, 20inch manhole with internal breath vent, overfill holes and vapour transfer vent hole,
2.vapor recovery system	API standard
3.Emergency Valve API standard	1nos, 3" , pneumatic controlled emergency valve at all compartments.
4.Piping	4" alum discharge pipe to the left hand side of trailer with minimum number of bends.Piping to be hydro-statically tested. The piping slope toward front at angle of 2°(minimum 1.5°)
5.Loading Discharge Faucet	1nos, dust cap on the kerb. API standard
6. Accessories	1nos, rotary product indicator mounted on API adaptor. API Compartment number and capacity indicator for each compartment to be installed near discharge faucets. Compartment capacity to be decaled on rollover coaming beside each compartment(both sides)
7.Control System	1) Emergency valve control. 2) Emergency cut off with three cut off switches, one at front left hand side, one at rear right hand side of trailer and one at right hand side of trailer at compartment 2.
8.Overfill Prevention	2nos, 5 wire optic probe installed to manhole cover and 1no. Optic socket,

1.Skid Plate	one set
2.Fodable handrail	One set
3. Landing Legs	JOST 28T single linkage, Gear type * 2 piece
4. Axles	13 Ton FUWA Axles * 3 unit
6. Suspension	Leaf spring suspension
7. Slack Adjuster	3.5", JOST90# bolt on ,in rubbing plate
8. Tyres	Triangle brand 12R22.5 * 12 pieces
9. Wheel Rim	9.0*22.5 * 12pieces

Packing &shipping
Nude and wax, shipped in container, bulk cargo ship,Flat deck or RO-RO ship
(1)Wax:
Do wax spray process to against the trailer body suffer seawater corrosion during shipping
(2)Package:
Stable fixing with steel wire,to protect the trailer during shipping
(3)Shipping
Reliable logistic service from famous freight supplier makes transport process safely and promptly

RFQ
1.Q: Are you amanufacturer or trading company?
A: we are manufacturer.
You are welcomed to visit our factory.

2.Q: What kind of payment do you accept?
A: We accept T/T and L/C at most.
If you want to use others payment, contact me for more info.

3.Q: What's your delivery time?
A: It depends on the products.

Products	Delivery time
Low bed trailer, Container trailer, skeleton trailer, side wall trailer,	10-15 days
Fuel tanker trailer, bulk cement trailer	30 days
Special truck, like detachable gooseneck trailer, hydraulic modular trailer	35 working days

4.Q: What's warranty time?
A: Main frame, one year;Vulnerable parts,three month; Others parts, half year;
5.Q: What's your after-sale service?
A: We provide technical support for our products.
Besides, we also provide you spare parts as long as you need.
More productfrom our company

Company information
Shandong hellootrailer co.,ltdis one of the qualified manufacturers of various trailers, like lowbed semi-trailer, flatbed semi-trailer, cargo trailer, etc. Integrated production, scientific research&development and professional sales teams, all those advantages
could provide full service of trailers, semitrailers, tractor head, Dump Truck, engineering machinery and

trailer parts.

With high standard machinery and automatic equipment, powerful R&D team and elite sales team, We have builtlong business relationship with many world famous enterprises such as SINOTRUK, SHACMAN, FAW, etc.
Contact Person
Jenny Wang- Sales Manager
Mobile phone86-15153173603